Showing posts with label backing to fly line knot. Show all posts
Showing posts with label backing to fly line knot. Show all posts

Wednesday, November 23, 2011

Backing to Fly Line (Nail Knot)

Use to attach leader butt to fly line or to attach backing to fly line.
Step 1:
Take a 1″ to 2″ long hollow plastic or metal tube of small diameter (a piece of drinking straw will do) and lay it next to the end of fly line. Lay butt end of leader on top of tube in the opposite direction with about 6″ to 8″ of leader butt extending beyond end of tube.
Nail Knot - Step 1
Nail Knot Tying Instructions - Step 1
Step 2:
Hold fly line, tube, and tag end of leader together in left hand. Grasp tag end of leader and wrap over itself, tube, and end of fly line in five or six closely spaced turns. Move from left to right toward end of fly line and hold wraps in place with thumb and forefinger of left hand. We’ve eliminated hand from picture to show wraps clearly.
Nail Knot - Step 2
Nail Knot Tying Instructions - Step 2
Step 3:
Pass the leader butt through the tube so the end passes back under the turns you’ve just made. Pull the ends of the monofilament in opposite directions, tightening them on top of the tube.
Nail Knot - Step 3
Nail Knot Tying Instructions - Step 3
Step 4:
Carefully slip the tube out, holding the wraps securely in place.
Nail Knot - Step 4
Nail Knot Tying Instructions - Step 4
Step 5:
Pull tag end of leader until the turns under your hand begin to tighten. Lubricate knot and pull tight on both ends of leader. Pliers or hemostat can be used to hold the tag end of leader.
Nail Knot - Step 5
Nail Knot Tying Instructions - Step 5
Step 6:
Trim tag ends of fly line and monofilament close to knot.
Nail Knot - Step 6
Nail Knot Tying Instructions - Step 6

Backing to Fly Line (Albright Knot)

Use to attach backing to fly line or to join sections of monofilament that vary greatly in diameter (e.g.: tying an 80-lb. shock tippet to a 15-lb. class tippet when saltwater fishing).
Step 1:
Form an open-ended loop in the fly line (or larger diameter monofilament). Pass the backing (or smaller diameter strand) through the loop and take one turn around fly line.
Albright Knot Tying - Step 1
Albright Knot Tying - Step 1
Step 2:
Wind the tag end of the backing around itself and the fly line loop. Take 10-12 winds, keeping them in place with left hand. Pass the backing through the loop so that it comes out on the same side it entered on.
Albright Knot Tying - Step 2
Albright Knot Tying - Step 2
Step 3:
Slide the coils of backing together and toward the end of the loop, stopping 1/8″ from end. Take care that backing does not slide off end of fly line before tightening.
Albright Knot Tying - Step 3
Albright Knot Tying - Step 3
Step 4:Tighten by pulling on the tag end of the backing while holding both strands of fly line in left hand. Pliers or a hemostat can be used on tag end. With left hand still holding both ends of fly line, pull on standing part of backing. Pull tag end of backing again and standing part one more time. Complete tightening by pulling only on standing parts of fly line and backing.
Albright Knot Tying - Step 4
Albright Knot Tying - Step 4
Step 5:
Trim the tag end of fly line and backing.
Albright Knot Tying - Step 5
Albright Knot Tying - Step 5
Note: The thin monofilament should be doubled when attaching thin monofilament tippet to heavy monofilament shock tippet.